logo
Nhà > các sản phẩm >
Loại hộp làm lạnh làm mát không khí
>
Air-cooled Scroll Chiller with 5-200 Tons Cooling Capacity Featuring Microcomputer Control System and Shell and Tube Evaporator

Air-cooled Scroll Chiller with 5-200 Tons Cooling Capacity Featuring Microcomputer Control System and Shell and Tube Evaporator

Chi tiết sản phẩm:
Hàng hiệu: DONGXING
Thông tin chi tiết
Hàng hiệu:
DONGXING
Thương hiệu máy nén:
Copeland/Bitzer/Hitachi
Thương hiệu van mở rộng:
Danfoss/Emerson
Công suất làm mát:
5-200 tấn
Bảo vệ an toàn:
Bảo vệ áp suất cao và thấp, bảo vệ chống đóng băng, bảo vệ quá tải, bảo vệ trình tự pha, v.v.
Thương hiệu điều khiển:
SIEMENS/Schneider
Loại máy nén:
Cuộn/Vít
Kiểm soát khả năng làm mát:
0-25-50-75-100%
Độ ồn:
65dB
Loại thiết bị bay hơi:
Vỏ và ống
Loại bình ngưng:
Làm mát bằng không khí
Nhãn hiệu quạt máy ngưng tụ:
EBM
chất làm lạnh:
R410A/R134a
Hệ thống điều khiển:
Máy vi tính
Nguồn điện:
380V/50Hz/3ph
Thông tin giao dịch
Số lượng đặt hàng tối thiểu:
1
Giá bán:
6000-2000000RMB/Set
chi tiết đóng gói:
Vỏ gỗ dán
Thời gian giao hàng:
15-30 ngày
Điều khoản thanh toán:
T/T
Mô tả sản phẩm
Air-cooled Scroll Chiller with 5-200 Tons Cooling Capacity Microcomputer Control System and Shell and Tube Evaporator
Product Overview

Our air-cooled explosion-proof scroll chillers with BT4 rating are engineered for maximum safety and efficiency in demanding industrial environments. These units feature fully-sealed, low-noise, high-efficiency compressors and advanced heat exchange technology.

Key Features
  • BT4 explosion-proof certification for hazardous environments
  • Fully-sealed, low-noise, low-vibration compressors
  • High-efficiency shell-and-tube condensers
  • Advanced digital electronic temperature control (+3°C to 50°C)
  • Comprehensive safety protection systems
  • Energy-saving operation with reduced electricity costs
  • Factory pre-assembled and tested
  • Available in cooling and heating dual-purpose models
Safety Systems
  • Compressor delay start protector
  • Over-current electrical protection
  • High and low voltage protectors
  • Fuse plugs and electronic time protection
  • Safety valves for normal operation assurance
Condenser Technology
  • Steel tube sleeve aluminum fin heat exchanger
  • Single-circuit and multi-circuit design options
  • Larger coil heat exchange area than standard designs
  • Uniform surface wind speed for stable heat exchange
  • High-efficiency threaded steel pipes
  • Interchangeable cover ends for flexible installation
  • Easy cleaning and maintenance access
Technical Specifications
Parameter DX-1/2A DX-01A DX-02A DX-03A DX-04A DX-05A DX-06A DX-08AD
Cooling Capacity (Kw) 1.53/1.79 2.94/3.44 5.67/6.63 8.39/9.82 10.9/12.75 13.95/16.32 16.9/19.77 21.8/25.51
Total Input (KW) 0.68 1.31 2.6 3.6 4.5 5.5 6.6 8.6
Parameter DX-10AD DX-12AD DX-15AD DX-20AD DX-25AD DX-30AD DX-40AD DX-50AD DX-60AD
Cooling Capacity (Kw) 28.01/32.78 33.79/39.53 44.15/51.65 59.08/69.12 71.72/83.91 87.2/102.02 113.58/132.89 135.49/158.52 181.68/218.02
Total Input (KW) 11 13.3 17 22.8 27.7 33.7 42.8 51.1 68.8
Power Supply: 1N-220V | 3N-380V/415V 50Hz/60Hz
Refrigerant: R22

Note: 1. Nominal cooling capacity conditions: chilled water in 12℃, out 7℃; cooling water in 30℃, out 35℃. 2. Specifications are subject to change without notice for further improvement.
Related Products